{"id":640,"date":"2023-08-02T07:29:38","date_gmt":"2023-08-02T07:29:38","guid":{"rendered":"https:\/\/blog.hostinger.io\/support\/2023\/08\/02\/8205039-how-to-point-a-domain-to-tiendanube-at-hostinger\/"},"modified":"2026-03-16T12:12:02","modified_gmt":"2026-03-16T12:12:02","slug":"8205039-how-to-point-a-domain-to-tiendanube-at-hostinger","status":"publish","type":"post","link":"https:\/\/www.hostinger.com\/support\/8205039-how-to-point-a-domain-to-tiendanube-at-hostinger\/","title":{"rendered":"How to Point a Domain to Tiendanube at Hostinger"},"content":{"rendered":"

To point your domain purchased at Hostinger to Tiendanube<\/b> (Sitelutions), follow these steps:<\/p>

\n<\/p>

Step 1 – Add CNAME Record<\/h2>

Go to your domain’s DNS Zone and create a CNAME record<\/a> <\/b>using the following values:<\/p>

\n

Host<\/b>: www<\/p>\n

Points to<\/b>: domain<\/i>.mitiendanube.com<\/p>\n

TTL<\/b>: 21600 or leave the default value<\/p>\n<\/div>

Make sure to replace domain<\/i> with your domain name. If you’re not sure about this value, you can verify it by checking the following guide (in Spanish): What is my Tiendanube Store URL?<\/a><\/b><\/p>

\n<\/p>

If you already have a CNAME record for www<\/b>, you can edit it to match the new value or delete it and create a new one.<\/p>

\n<\/p>

Step 2 – Add A Records<\/h2>

First, delete<\/b> all the existing A records<\/a><\/b> if there are any. Next, add the following two A records:<\/p>

\n\n\n\n\n
\n

A Record 1<\/b><\/p>\n<\/td>\n

\n

A record 2<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

Host<\/b>: @<\/p>\n

Points to<\/b>: 185.133.35.13<\/p>\n

TTL<\/b>: 21600 or use the default value<\/p>\n<\/td>\n

\n

Host<\/b>: @<\/p>\n

Points to<\/b>: 185.133.35.14<\/p>\n

TTL<\/b>: 21600 or use the default value<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>

After you specify new DNS records, propagation<\/a><\/b> will start, which can take up to<\/b> 24 hours<\/b> to fully propagate. Wait until it is propagated to proceed with the next step.<\/p>

\n<\/p>

Step 3 – Link Your Domain to Tiendanube<\/h2>

Go to your Tiendanube Administrator panel and select Settings → Domains<\/b>. Next, click on Link a new domain.<\/p>

\n<\/p>

Enter your domain name, including www,<\/b> and click on Save domain<\/b>. <\/p>

\n<\/p>

If the records on the previous steps were properly added and propagated, your domain will appear as Active<\/b> and working with your Tiendanube store.<\/p>

\n<\/p>

Additional Resources<\/b><\/p>